Specifications - Junghans j800.1 Manual De Instrucciones

4.3. ready for use
to ensure that your junghans watch is always ready for use, you should
avoid allowing its power reserves to run down. the watch regularly
checks to see if it still has sufficient battery power. if it no longer has
enough (e.g. because the battery has run out or the ambient tempera-
ture is too low, which impairs battery performance), the second hand
stops for 4 seconds and then quickly catches these 4 steps up. if the
battery does not recover (e.g. through the ambient temperature getting
better), you should take your watch to your authorised specialist dea-
ler to have the battery changed. alternatively, send it to the junghans
service centre.
please ensure that the battery is disposed of properly in accordance
with statutory regulations.
4.4. declaration of conformity
Uhrenfabrik Junghans GmbH & Co. KG herewith declares that this pro-
duct conforms to the principle requirements and other relevant stipula-
tions of directive 1999/5/ec.
a corresponding declaration of conformity can be requested from
info@junghans.de.
30
C. specifications
calibre j805.1
• hand-winding mechanical
movement
• 17 or 19 jewels
• 28,800 semi-vibrations per
hour
• power reserve up to 42 hours
when fully wound
• shockproof: incabloc or
nivachoc
• spring: nivarox
• balance: gold plated nickel
calibre j800.1
• automatic movement
• bi-directional winding
• 25 or 26 jewels
• 28,800 semi-vibrations per
hour
• power reserve up to 38 hours
• shockproof: incabloc or
nivachoc
• spring: nivarox
• balance: gold plated nickel
calibre j880.2
• automatic movement with
chrono scope mechanism
• automatic winding mechanism
• 25 jewels
• 28,800 semi-vibrations per
hour
• power reserve up to 42 hours
• shockproof: incabloc or
nivachoc
• spring: nivarox
• balance: gold plated nickel
calibre j643.29/j645.33
• quarz movement
• 7 jewels
• frequency 32'768 Hz
• average life of battery up to
43 months
31