Radiodetection PCMx Guia Del Usuario página 10

Conducting survey types
simultaneously
The PCMx allows users to conduct
both an ACCA and an ACVG survey
simultaneously. By collecting the data in
one pass of the pipeline, rather that two,
survey time can be reduced significantly.
Procedure:
1. Connect the transmitter to the pipeline
and ground using the procedure
described previously.
2. Set the PCMx transmitter to either
ELCD or LFCD mode.
3. Connect the A-frame to the PCMx
receiver via the accessory socket,
and turn on the receiver.
4. The PCMx will automatically select
ACVG mode and an A-frame symbol
will be displayed.
5. Match the mode of the receiver to the
transmitter by repeated presses of the
key.
6. Begin your survey by following the
procedures given above for conducting
an ACVG survey. The display will
show locate information (Peak-PLUS
mode) and FF information.
7. To take a 4Hz current reading, follow
steps 2 through 6 of the procedures
given above for conducting an ACCA
survey.
PCM Manager
for mobile devices
Available from Google Play Store,
PCM Manager for mobile devices is
a companion application for PCMx
receivers. It enables live graphing of
survey results, walk forward and walk
back features. It can also be used to
collect location data from compatible
GPS devices. After installing the software
on your mobile device select the PCM
Manager icon.
Prepare the PCMx receiver to pair by
selecting the BT option in the system
menu. Scroll to PAIR and press the
key to select the BT – PC option.
18
ON your Android device ensure
Bluetooth is switched on. Launch PCM
Manager and choose the menu option on
the top left. Select Pairing.
Press SEARCH FOR DEVICES. On
the PCMx receiver press the key to
initiate pairing. The name of the device
will appear underneath BLUETOOTH
DEVICES FOUND.
Select the device name. A prompt for
the pairing code will appear. Insert 1234
and press OK. The device name will now
appear under Paired Devices.
Press to return to the main screen.
Select START SURVEY to begin a
survey. Each time you take a survey
measurement, it will appear on the screen
and a graph will appear over time. Select
FINISH SURVEY to end the survey.
For more information about the
application, select Manuals from the PCM
Manager menu or download the manual
from www.radiodetection.com/PCMx
19