Crypto URC-605 Manual De Instrucciones página 19

If you have finished learning all the buttons you want and you need to store all the
learned key data press the
button. The LED light indication on the
Attention: If after the completion of the learn process you reprogram this particular
device by putting a different device code l stored data will be reset and
replaced with the new ones.
Clear Learn data for one button
Press and hold pressed at the same time the device
key
Then input number 9990.
Press the button that you want to clear. The light will
blink twice and button will be cleared.
Press sequentially all the buttons you want to clear.
Clear Learn data for one device
Press and hold pressed at the same time the device
key
Then input number 9991 and all learned buttons for this
device will be cleared.
Clear Learn data for all the devices
Press and hold pressed at the same time the device
key
Then input number 9995 and all learned buttons for all
devices will be cleared.
Factory reset
Press and hold pressed at the same time the device
key
Then input number 9300 and remote will return to
factory reset state.
and button.
and button.
and button.
and button.