Crypto URC-605 Manual De Instrucciones página 20

4 MACRO KEYS PROGRAMMING
You can program a MACRO button so that it performs a series of button functions, by,
pressing a single button.
Example: Change from TV to DVB-T
If you are watching channels on your TV and you want to change and see STB
channels you can easily program the Macro button as follows:
1. Press the STB button and at
the same time until the device indication
light turn on constantly.
To program MACRO1 button press code
9960.
Press in sequence the keys you want
according to the functions you need the
devices to do.
For our example do the following:
2. Press
buttons to change the TV signal source
Note: Depending on your TV, press the
button repeatedly to change the
TV signal source, or use the arrow keys
and OK.
You need to change the signal source
from TV to AV or HMDI, etc. depending
on how you have connected the STB to
the TV.
3. Press
to turn on the DVB-T device
4. After you have finished press OK
button to store the data.
For our example if you now press the
macro button then the TV will change
the source signal to the selected input
connection the STB will turn on and you
will control it with the remote.