Avintage AVU8X(/IX) Manual De Utilización página 56

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 143
AVU53CDZA AVU54SXDZA(/IX)
 "RUN"
Power indicator
button
To turn the appliance on or off.
Press and hold this button for around 3 seconds.
button
Inner lighting control button
 Display
Upper chamber electronic display
 Display
Lower chamber electronic display
 Bouton
Upper chamber temperature setting button
 Bouton
Lower chamber temperature setting button
Press "
" to adjust the upper chamber temperature. The relevant chamber display will start to flash
and each press on the button will alter the temperature by 1°C. Once the lowest set temperature of 5°C is
reached, the display automatically changes to the highest set temperature of 10°C. Once selected, the
display will flash for approximately 5s before showing the current internal temperature of the cellar. The
set temperature can be viewed at any time by pressing and holding the temperature select buttons for 5s.
Press "
" to set the upper chamber temperature.. The relevant chamber display will start to flash
and each press on the button will alter the temperature by 1°C. Once the lowest set temperature of 10°C
is reached, the display automatically changes to the highest set temperature of 20°C. Once selected, the
display will flash for approximately 5s before showing the current internal temperature of the cellar. The
set temperature can be viewed at any time by pressing and holding the temperature select buttons for 5s.
In the event of a power cut, all previously selected temperature settings will be deleted and each chamber
will re-initialize to the factory-preset temperature of 6°C for the upper chamber and 12°C for the lower
chamber.
Function instruction
 Temperature alarm:
If inner temperature is higher than 23°C after running 10 hours with power, the "HI" is shown in display
panel, and the buzzer alarm after one hour continuously. It informs that the inner temperature is too
high, please check the reason. If inner temperature is lower than 0°C, the "LO" is shown in display
panel, and the buzzer alarm too will sound.
 Temperature recollection function:
In the event of a power interruption, wine cabinet will remember the previous temperature settings and
when the power is recovered, the cabinet temperature will go back the same setting temperature as
power off.
56

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido