Installing Your New Appliance - Hisense RW54N1SSD Manual De Operación

●Make sure that the plug is not squashed
or damaged. Damage may cause short
circuit, electric shock or overheat and
even cause a fire.
●Do not insert the main plug and use the
appliance if the socket is damaged. There
is a risk of electric shock or fire.
●Switch off the appliance and disconnect it
from the main power before you clean or
move it.
●Never unplug the appliance by pulling on
the electrical cord. Always grip the plug
firmly and pull straight out from the socket
to prevent damaging the power cord.
●Any electrical component must be
replaced or repaired by a qualified
electrician or authorized service engineer.
Only genuine spare parts should be used.
●Never plug or unplug the unit with wet
hands.

Installing your new appliance

Before using the appliance for the first time, you should be informed of the following tips.
Ventilation of appliance
In order to improve efficiency of the cooling system and save energy, it is
necessary to maintain good ventilation around the appliance for the dissipation
of head. For this reason, sufficient clear space should be available around the wine cooler.
Installation Requirement: It is advisable for there to be at least 1/2" clearance at the back,
1/4"at top and 1/4" at sides. The installation should allow the unit to be pulled forward for
servicing, if necessary.
NOTE:
* Use this appliance only within the ambient temperature from 50 deg F / 10 deg C to 95 deg
F / 35 deg C.
The product may not work properly if being left at a temperature above or below the
indicated range for a long period.
Risk of fire
●Keep burning candles, lamps and other
items with naked flames and sources of
ignition away from the appliance.
Hisense Wine Cooler
4