Screen Brightness And Contrast/Key - Fisher&Paykel AquaSmart Manual De Instrucciones

Settings Menu
Screen Brightness and Contrast
',,Aau can adjust the brightness and/or contrast of your screen to suit your
individual needs.
Access the Settings Menu (refer page 33).
Scroll to the SCREEN BRIGHTNESS or CONTRAST option, and press SELECT:
Use the SCROLL buttons to increase or decrease the screen brightness/contrast.
Press SELECT to confirm your selection and return to the Settings Menu.
Key Lock mode
Key lock automatically locks the buttons on your AquaSmart _ when not in use.
This will avoid accidental button pushes from items left on the lid of the washer
and also from any little fingers.
To turn Key Lock Mode ON or OFF:
Access the Settings Menu (refer page 33).
Scroll to the KEY LOCK MODE option, and press SELECT.
Use the SCROLL buttons to select ON or OFR
Press SELECT to confirm your selection and return to the Settings Menu.
If Key Lock mode is switched ON:
To turn your washer on, push and hoJd the POWER button for 3 seconds. This
will activate the display panel. You will then be able to select your wash options
and press S]7_RT.The buttons will then be locked.
To PAUSE your washer at any time during the cycle, press the PAUSE button
twice. This will allow you access to the Wash Options, then press START to restart
your cycle. The buttons will then lock.
To STOP your washer and power off, press the POWER button twice.
If you can't remember how to unlock the buttons, press any button and the
display screen will remind you.
Hints
Hints screens are provided to help to explain each of the wash choices. Your
AquaSmart _ comes with these hints programmed ON. When you become more
experienced with the way your washer functions, you may wish to turn these
hints OFF.Tb do this access the SETTINGS MENU, select HINTS and scroll to OFF.
Press the SELECT button to confirm your choice.
Accessthe Settings Menu (refer page 33),
Scroll to the HINTSoption, and press SELEC] °.
Usethe SCROLLbuttons to scroll to OFF.
PressSELECT to confirm your selection and return to the Settings Menu.