Solving Wash Problems - Fisher&Paykel AquaSmart Manual De Instrucciones

Ocultar thumbs Ver también para AquaSmart:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

So ving wash problems
Was the washer or dryer overloaded7
Selecting the EASY IRON cycle will minimize
wrinkling
or creasing.
Try not to leave wet clothes sitting
in the washer or laundry basket.
Was the washer overloaded?
Wash lint givers, eg. towels, separately from lint receivers, eg. synthetics.
Also, wash similar colors
together
(eg. light colors separately from dark colors).
Have you used enough detergent?
Over drying clothes in the dryer can cause them to attract lint
Try using
a Conventional
cycle (refer to page 17), or the Fabric Softener rinse (select FABRIC
SOFTENER to ON).
Did you use enough
detergent
for amount of dirt?
Are you using a good quality
detergent?
Was the washer overloaded?
Separate heavily and lightly soiled garments.
Use a wash temperature
suitable for soil type, eg. warm for greasy soils, cold for muddy soil
Did you use too much detergent?
Was the washer overloaded?
Is your cold water less than 68°F (20°C)7 - select Cold+ temperature
option
Remember to separate whites and colors,
Wash non colorfast
items separately
and select COLORS cycle_
Remember to remove items from washer as soon as the wash is finished
Are you using enough detergent
for the amount
of dirt?
Empty washer and put through
a CLEAN ME cycle.
Have you separated out larger items from smaller items?
Try using a Conventional
cyde_
Try using the EASY IRON cycle to wash Shirts.
Wash bed sheets on their own using the SHEETS cycle.
Try washing
smaller load sizes_
If problems persist, please contact
your Fisher & Paykel dealer or service agent (refer to page 45).

Publicidad

Tabla de contenido
loading

Tabla de contenido