The Wireless Tab - Wireless Mac Filter; Figure 6-23: Wireless Tab - Wireless Mac Filter; Figure 6-24: Mac Address Filter List - Linksys WRT54G Guia Del Usuario

Wireless-G Broadband Router

The Wireless Tab - Wireless MAC Filter

Wireless access can be filtered by using the MAC addresses of the wireless devices transmitting within your
network's radius.
Wireless MAC Filter. To filter wireless users by MAC Address, either permitting or blocking access, click Enable.
If you do not wish to filter users by MAC Address, select Disable.
Prevent. Clicking this button will block wireless access by MAC Address.
Permit Only. Clicking this button will allow wireless access by MAC Address.

Figure 6-23: Wireless Tab - Wireless MAC Filter

Edit MAC Address Filter List. Clicking this button will open the MAC Address Filter List. On this screen, you can
list users, by MAC Address, to whom you wish to provide or block access. For easy reference, click the Wireless
Client MAC List button to display a list of network users by MAC Address.
Change these settings as described here and click the Save Settings button to apply your changes or Cancel
Changes to cancel your changes.

Figure 6-24: MAC Address Filter List

Chapter 6: Configuring the Wireless-G Broadband Router 44
The Wireless Tab - Wireless MAC Filter