Fisher&Paykel DE62T27C Instrucciones De Instalación página 26

nsta ation instructions
Electrical connections (electric models only)
For 4-wire connections by power cords
4-wire power supply cord must have four 10 AWG copper wires and match a 4-wire receptacle
of NMEA Type14-30R. The fourth wire (ground conductor) must be identified by a green cover
and the neutral wire by a white cover.
For 4-wire connections by direct wiring
[< 4W'
3/4"ULdisted [ 1 of wires [
.... / s_rippea orl
strain relier N / _ nsulatio I
/(}2hire or center)
lO-gauge, B-wire with / -_--<-- ........ ......
ground wire (Romex) bare ground wire .......
Fig.22 Wiring 4-wire connections
Strip 4 I/4" of outer covering from end of
came. Strip insuJation back 11
_ hapeends of wire
into a hook.