Using A Microsd Tm Card; Battery Handling Information - Pantech HotShot Guia Del Usuario

USING A microSD TM CARD
TM
A microSD card stores sounds, videos, images, photos, music, and other files.
A 2GB microSD TM card comes pre-installed in your phone.
INSTALLING A microSD CARD
TM
To install your microSD TM card:
1. Remove the battery cover and the battery.
2. Press the microSD TM card into the slot with the gold
contacts facing down.
3. Replace the battery and the battery cover.
To prevent possible damages, please keep the microSD
slot closed at all times regardless of whether a microSD
is inserted or not.
REMOVING A microSD CARD
TM
TM
To remove the microSD card:
1. Remove the battery cover and the battery.
2. Gently pull the exposed edge of the microSD
your fingertip to release it from the slot.
TM
3. Remove the microSD card.
4. Replace the battery and the battery cover.
To ensure the proper function of removable memory, please
use a microSD TM card.
20
TM card
TM
card
TM
card with

BATTERY HANDLING INFORMATION

DO'S
Only use the battery and charger approved for use with the Hotshot
fire, explosion, leakage, or other hazard.
other hazard.
temperatures above or below the recommended range, give it time to warm up or cool down before using.
DON'TS
Don't attempt to disassemble or open the battery – it is a sealed unit with no serviceable parts.
Don't crush, bend or deform, puncture or shred the battery.
Don't drop the phone or battery. If the phone or battery is dropped, especially on a hard surface, and the user
suspects damage, take it to a service center for inspection.
Don't leave the battery in extremely hot or cold temperatures. Otherwise, it could significantly reduce the
capacity and lifetime of the battery.
Don't modify or remanufacture, attempt to insert foreign objects into the battery, immerse or expose to water
Don't accidentally short-circuit the battery by carrying it in your pocket or purse with other metallic objects
such as coins, clips and pens. This may critically damage the battery.
Don't short-circuit a battery or allow metallic conductive objects to contact battery terminals.
Don't dispose of the battery by placing into a fire.
.
TM
01
02
03
04
05
06
07
08
21