VWR 89369-158 Manual De Instrucciones página 4

8. Press the SET button, the day number will flash.
 
9. Press the or button to increment the display to the correct value.
10. Press the SET button, the time-of-day hours will flash.
 
11. Press the or button to increment the display to the correct value.
12. Press the SET button, the time-of-day minutes will flash.
 
13. Press the or button to increment the display to the correct value.
14. Press the SET button, the display will return to the current temperature/relative humidity display.
DISPLAYING °F OR °C
With the meter turned
3 seconds. When using the data logging function, the temperature values recorded will match the selected display
unit (°F or °C).
MINIMUM AND MAXIMUM MEMORY
There are six points that are automatically recorded into memory:
• Minimum Ambient Temperature Achieved
• Maximum Ambient Temperature Achieved
• Minimum Ambient Relative Humidity Achieved
• Maximum Ambient Relative Humidity Achieved
• Minimum Dew Point Temperature Achieved
• Maximum Dew Point Temperature Achieved
Minimum and maximum memories are NOT programmable. The minimum value recorded into memory is the
minimum reading achieved since the last time the memory was cleared. The maximum value recorded into memory is
the maximum reading achieved since the last time the memory was cleared. The minimum and maximum memories
are maintained over the period since the memory was last cleared.
VIEWING MINIMUM/MAXIMUM MEMORY
Press the MIN/MAX button, the display will show "MIN" at the bottom left side of the display indicating that the minimum
memory values are being displayed.
Press the MIN/MAX button a second time, the display will show "MAX" at the bottom left side of the display indicating
that the maximum memory values are being displayed.
Press the MIN/MAX button a third time to return to the current temperature/humidity display (MIN/MAX will no longer
VWR Collection Manual ver 3, rel 5 30.10.2013
button for