Activating The Answer Machine; Locating A Handset ("Paging"); De-Registering Handsets - Gigaset A390 Manual Del Usuario

Calling the answer machine and
playing back messages
~
(Dial your own number)
to your announcement: press the
enter the system PIN
The following keys are used for operation:
A
Go to the start of the current mes-
sage.
Press twice to go back to the previous
message.
B
Stop playback. Press again to resume.
3
Skip to next message.
0
Delete current message.

Activating the answer machine

~
(Enter your own number and allow the
phone to ring until you hear the message:
"Please enter PIN")
Your answer machine is activated. It tells
you how much memory time is left. The
messages are now played back. The answer
machine cannot be deactivated remotely.
Locating a handset
("paging")
You can locate your handset using the base
station.
◆
Briefly press the registration/paging
key on the base station (
◆
All handsets will ring simultaneously
("paging"), even if the ringer tones are
deactivated.
End paging: briefly press the register/pag-
ing key on the base station (
c
the talk key on a handset.
¢
while listening
9
key and
¢
~
enter system PIN
¢
page 1).
¢
page 1) or
13
Registering handsets
You can register up to four handsets on
your base station (Gigaset A39H/A49H rec-
ommended).
Please note
Each additional handset must be regis-
tered on the base station in order for it
to work properly!
Manually registering handsets to
Gigaset A390/A490/A495
1. On the base station: 
¢
press and hold the registration/paging key
( page 2) for min. 3 sec.
2. On the handset: 
within 60 sec. of pressing the registration/
paging key ¢
¢ ¢
MENU Settings
OK Register HS
¢
system PIN of the base station (default is 0000)
. 
OK
Registering flashes in the display
Registration takes approx. 1 minute.
De-registering
handsets
Handsets can only be de-registered by
resetting the base station to its default set-
¢
tings. This will also reset every other set-
ting page 15.
¢ ¢
¢ ¢
OK Handset
OK Enter the
.