Giropes Baxtran BR15 Manual De Usuario página 49

• Place 1/3 of the maximum weight on the plate and press
W1
the key
W2 •Place 2/3 of the maximum weight on the plate and press
the key
W3 •Place the maximum weight on the plate and press the key
the key
W4
•Press the key
and go back to the menu LF3)
LF3
•Use the keys
key
SPEED OF THE AD CONVERTER
SPEED 1 standard speed 15Hz.
SPEED 2 high speed 30Hz.
SPEED 3 low speed 7.5Hz
*This function stays blocked when UF-5 is in mode HOLD 1.
*The value of factory is 1
DISPLAY
LF4
•Press the key
again automatically.
SPEED 1
•Use the key
LF 4
•Use the keys
to exit from the calibration and go back to the menu LF3)
to exit from the calibration and go back to the menu LF3)
to exit from the calibration and go back to the menu LF3)
to complete the lineal calibration. (press the key
, and then the key
to exit from the menu and the scale will begin again automatically.
LF 4
DESCRIPTION AND SEQUENCE OF USE
to start or the key
and then the key
to exit from the configuration and go back to the menu LF4)
, and then
to exit from the menu and the scale will start again automatically.
to calibrate 2/3 th the capacity. (press
to calibrate 2/3 th the capacity. (press
to calibrate the full capacity. (press
to continue with other adjustments and press the
to exit from the menu and the scale is going to begin
to select the speed of the AD converter ( press the key
To continue with the other adjustment and press the key
USER'S MANUAL BR15
to exit from the calibration
EN
49