sylvac S Dial Work Analog Nano Smart Modo De Empleo página 15

Connection :
1° Activate Bluetooth compatible software and hardware (Master : PC, Display Unit).
®
2° Start the instrument. By default the Bluetooth
mode).
3° If no connnection is established during the advertisement period reactivate the Bluetooth
menu.
4° Instrument is ready to communicate (connected mode.)
Only with paired profile :
Pairing with master is automatically done at first connection.
To connect the instrument to a new master (new pairing), pairing information on the instrument must be cleared using the
bt/ rESEt menu.
module is active and the instrument is available for connection (advertising
®
15
module using the bt / On
®
E