Section 10 - Top Plate Installation - Holland RK-10855-L Instrucciones De Instalación

10. Top Plate Installation
1. Visually inspect both pocket inserts for excessive wear, chips,
cracks or gouges. If any of these conditions are found, the
pocket insert(s) must be replaced (Figure 25). For pocket
insert replacements, contact SAF-HOLLAND Customer
Service and request RK-PKT-2.
2. If pocket inserts are dislodged from fifth wheel casting,
clean pocket area of casting and apply a strip of double
face tape in bottom of pockets. Install pocket inserts by
pressing them down into the pocket areas (Figure 26).
3. Using a lifting device capable of lifting 500 lbs. (227 kg),
install fifth wheel top plate onto its mounting base.
NOTE: Follow instructions published by lifting device
manufacturer for proper operation of lifting device.
4. Install bracket pins through fifth wheel casting and
mounting base and secure by installing the bracket pins
retention bolts and nuts (Figure 27). Torque retention
XL-FW10064BM-en-US Rev A · 2011-12-02 · Amendments and errors reserved. © SAF-HOLLAND, Inc.
Installation Instructions
Figure 25
Figure 26
Figure 27
13