Section 6 - Right-Hand Release Installation - Holland RK-10855-L Instrucciones De Instalación

6. Right-Hand Release Installation
1. Remove the cam bolt and rotate the cam away from
lug "B" (Figure 13).
2. Place drill fixture on top of the lugs with the "R" facing
up. Put cam bolt into the fixture. Insert locator pin into
the hole in lug "A" (Figure 14).
3. Clamp the drill fixture to the fifth wheel. Drill through
lug "B" with a #7 (0.201) drill bit (Figure 15). Remove
the fixture after drilling. DO NOT reuse the drill fixture.
XL-FW10064BM-en-US Rev A · 2011-12-02 · Amendments and errors reserved. © SAF-HOLLAND, Inc.
Installation Instructions
Figure 13
Figure 14
Figure 15
9