Replacing The Light Bulbs - GHP Group 18-600-310 Instrucciones De Instalación Y Funcionamiento Para El Propietario

Replacing the Light Bulbs

The 18" models use two (2) 40 watt, E-12 socket base light bulbs. The 23" models use two (2) 60 watt, E-12
socket base light bulbs. These are small base bulbs typically found in chadeliers with candle shaped bulbs.
The bulbs are located underneath the logset/ emberbed. For convenience, if one of the bulbs burns out, it may
be easier to replace both of the bulbs at the same time.
WARNING: Do not replace bulbs with higher wattage bulbs. Use of higher
rated bulbs may result in a fire, causing property damage, personal injury,
or loss of life.
1. Turn off power to the unit and
ensure that it is unplugged
from the electrical outlet.
2. Let the fireplace cool if it has
been operating.
3. Remove the glass front from
the unit by unscrewing the
two thumbscrews counter-
clockwise
the glass door.
See Figure 5.
4. Locate the two log set bolts
on the left and right side of
the top of the ember bed and
remove them by unscrewing
them counterclockwise
See Figure 6.
at the top of
.
Figure 5
Figure 6
Electric Fireplace Insert 18/
Thumb Screws
Log Bolts
23
12