damaged, liquid has been spilled or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture, does not operate normally, or has
been dropped.
15) To completely disconnect this apparatus from the AC mains, disconnect the power
supply cord plug from the AC receptacle.
16) The mains plug of the power supply cord shall remain readily operable.
17) WARNING – To reduce the risk of fire or electric shock, do not expose this apparatus
to rain or moisture.
18) Do not expose this equipment to dripping or splashing and ensure that no objects
filled with liquids, such as vases, are placed on the equipment.
19) Maintain at least 6 inches (15.25 cm) of unobstructed air space behind the unit to
allow for proper ventilation and cooling of the unit.
20) CAUTION – For rack mounted power amplifiers, keep all wiring and materials away
from the sides of the unit and allow the unit to cool down for 2 minutes before
pulling from a rack enclosure.
21) Amplifiers and loudspeaker systems, and ear/headphones (if equipped) are capable
of producing very high sound pressure levels which may cause temporary or
permanent hearing damage. Use care when setting and adjusting volume levels
during use.
22) FCC Part 15 Compliance Statement (for digital products, as applicable) - Part
15.21: Changes or modifications not expressly approved by the party responsible
for compliance could void the user's authority to operate the equipment. NOTE:
The manufacturer is not responsible for any radio or TV interference caused by
unauthorized modifications to this equipment. Such modifications could void the
user's authority to operate the equipment.
23) WARNING – To maintain product safety, products with internal or external
(battery pack) batteries: •Batteries and/or the product in which they are installed,
shall not be exposed to excessive heat such as sunshine, fire or the like. •There may
be a danger of explosion if the battery is incorrectly connected/replaced. Replace
only with the same or equivalent type battery specified in the instructions or on the
product.
24) CAUTION – Unplug unit and allow it to cool before touching/ replacing vacuum
tubes.