Leaving The Basic Settings Menu; Operating Modes; Adaptive Operation - Hilti SI­-AT-­A22 Manual De Instrucciones Original

Display icons

5.5.4 Leaving the basic settings menu

1. Move the selection frame to the
2. Press the OK button.
◁ The last previously shown operating mode will be displayed.

5.6 Operating modes

Note
The descriptions of the individual operating modes below apply only
to forward rotation of the impact wrench (tightening).
(slackening), the action of the impact wrench is not controlled.

5.6.1 Adaptive operation

In this operating mode the adaptive torque module regulates the tightening
of the selected type of threaded fastener. The tightening parameters from
the most recently installed software update are used. Product designations
and tightening parameters can change, so it essential to ensure that the
software version installed in the torque module is always up to date.
• When the "Adaptive" operating mode is selected,
wrench's "AT" torque indicator lights up.
• The switch for selecting the operating stage is not active. But you can
use the control switch to turn the impact wrench ON and OFF.
Follow the operating instructions for your impact wrench.
Printed: 15.09.2017 | Doc-Nr: PUB / 5331558 / 000 / 01
Meaning
Maintenance of the impact wrench is soon due
The segments in the rectangle on the right in the
display indicate residual usage period.
Maintenance of the impact wrench must be carried
out immediately
The icon appears automatically when the residual
usage period expires (warning).
The "Adaptive" and "Tightening" operating modes
can no longer be selected.
symbol.
In reverse
the impact
English 9