Display Showing Maintenance Status / Remaining Period Of Use; Leaving The Basic Settings Menu; Operating Modes; Adaptive Operation - Hilti SI­-AT-­A22 Manual De Instrucciones Original

5.5.4 Display showing maintenance status / remaining period of use

After activation of the
period of use of the impact wrench until the next service is shown in the
following display screens.
Note
Irrespective of what is shown in the display, the impact wrench must be
serviced at least once a year in order to ensure the quality of the bolt
fastenings made with it.
Display showing maintenance status of the impact wrench
Indication in the display Meaning

5.5.5 Leaving the basic settings menu

1. Move the selection frame to the
2. Press the OK button.
◁ The last previously shown operating mode will be displayed.

5.6 Operating modes

5.6.1 Adaptive operation

Note
The following information applies only to forward rotation of the impact
wrench (tightening). In reverse rotation, the impact wrench runs at the
highest torque setting.
In this operating mode the adaptive torque module regulates the tightening
of the selected type of bolted connection. The tightening parameters from
the most recently installed software update will be applied. As the product
designations and the tightening parameters may change, make sure that the
latest software version is installed in the torque module.
Printed: 10.02.2017 | Doc-Nr: PUB / 5331558 / 000 / 00
symbol in the basic settings menu the remaining
The impact wrench is in good condition, no
maintenance required in the foreseeable future
Maintenance of the impact wrench is soon due
The segments in the rectangle in the display
show the remaining period of use.
Maintenance of the impact wrench must be
carried out immediately.
The indication in the display appears automat-
ically after the end of the remaining period of
use (warning).
The "Adaptive" and "Tightening" operating
modes can no longer be selected
symbol.
English 9