Work Area Safety; Electrical Safety - EGO POWER+ BA1400T Manual Del Usuario

WORK AREA SAFETY

 Keep the work area clean and well lit. Cluttered or dark areas invite accidents.
 Do not operate power tools in explosive environments, such as in the
presence of flammable liquids, gases, or dust. Power tools create sparks,
which may ignite the dust or fumes.

ELECTRICAL SAFETY

 Do not expose power tools to rain or wet conditions. Water entering a power
tool will increase the risk of electric shock.
 Use only with chargers listed below:
BATTERY PACKS
BA1400T, BA1400T-FC,
BA2800T, BA2800T-FC,
BA4200T, BA4200T-FC,
BA5600T, BA5600T-FC
BATTERY TOOL USE AND CARE
 Prevent unintentional starting. Ensure the switch is in the off-position before
connecting to battery pack, picking up or carrying the appliance. Carrying
the appliance with your finger on the switch or energizing appliance that have the
switch on invites accidents.
 Disconnect the battery pack from the appliance before making any
adjustments, changing accessories, or storing appliance. Such preventive
safety measures reduce the risk of starting the appliance accidentally.
 Do not modify or attempt to repair the appliance or the battery pack (as
applicable) except as indicated in the instructions for use and care.
 Do not use a battery pack or appliance that is damaged or modified.
Damaged or modified batteries may exhibit unpredictable behavior resulting in fire
explosion or risk of injury.
 Recharge only with the chargers specified by the manufacturer. A charger
that is suitable for one type of battery pack may create a rise of fire when used
with another battery pack.
CHARGER
CH2100, CH2100-FC,
CH5500, CH5500-FC
56V BATTERY 2.5AH/5AH/7.5AH/10AH
7