DOMUS LINE DOTTI Manual De Instalación página 7

INSTALLATION MANUAL
HOW DOTTI WORKS
- ON-OFF function. The luminaires connected to DOTTI are switched on and
off by briefly touching the device with the fingers.
- DIMMER and LEVEL MEMORY functions. The brightness of the connected
luminaires can be controlled with a prolonged touch in the activation area;
when controlling the brightness, the connected devices will flash briefly to
indicate when maximum brightness has been reached. The selected
brightness will be stored until the next reset (LEVEL MEMORY).
ATTENTION
- If the external wires on the device are damaged the device must be
replaced.
- Connect DOTTI only to a safe power supply with 12Vdc or 24Vdc stabilised
voltage (sold separately) and never connect it to other electronic switches
or DIMMERS of any kind. It is not advised to connect DOTTI to a traditional
mechanical switch for domestic use.
- DOTTI must not be installed near heat sources or electromagnetic fields or
metal surfaces which could alter or compromise its operation.
EN
WARRANTY
The warranty on the device is valid only if powered by a power supply
provided by DOMUS Line. The warranty's general terms and conditions for
this device are available at www.domusline.com