Standard Installation - entrematic Ditec LUXO Serie Manual Del Usuario

4. Standard installation

TX - 4x0.5 mm²
Ref. Code
1 GOL4
2 LAMPH
XEL5
3
GOL4M
4 LAB9
LUXO3B
LUXO3BH
LUXO4BH
5
LUXO5B
LUXO5BH
LUXO5VBH
LUXO3B
LUXO5B
LUXO3BH
6
LUXO4BH
LUXO5BH
LUXO5VBH
XEL2
7
LAB4
8
A
7
RX - 4x0.5 mm²
6
4x1.5 mm² (*)
7
Transmitter
Flashing light
Key selector
Codified via radio control keyboard
Magnetic loop detection device for traffic monitoring
AC reversible and irreversible actuator for door wing of up to 3.5 m
DC irreversible actuator for door wing of up to 3.5 m
DC irreversible actuator for door wing of up to 4 m
AC reversible and irreversible actuator for door wing of up to 5 m
DC irreversible actuator for door wing of up to 5 m
DC irreversible actuator for door wing of up to 5 m with limit switch
Cable 4x1,5 mm²
Cable 2x1,5 mm²
Photocells
Photocells IP55
Control panel
Connect the power supply to an approved omnipolar switch with an opening distance
of the contacts of at least 3mm (not supplied).
The connection to the mains must be made via an independent channel, separated
from the connections to command and safety devices.
2
3
5
2x1.5 mm²
4x0.5 mm²
7
TX - 4x0.5 mm²
6
4x1.5 mm² (*)
4
7
RX - 4x0.5 mm²
1
Description
24