Attachment Assembly - Kenmore 116.31200 Manual De Uso Y Cuidado

ATTACHMENT ASSEMBLY
HOSE AND WAND
1. Insert the tab
on the telescopic
wand into the "J"
slot on the hose.
Twist the tele-
scopic wand to
lock in place.
See (Fig 1)
Hose J
2. Place the tele-
scopic wand in
the wand holder
and route the
hose as shown.
(Fig 3)
"J" Slot_-......
m
Tab ----_-_ .____
Telescopic
Wand _____
Fig 1 I J
Fig.
3. Wrap the hose into the hose holder
located on the handle of the vacuum
cleaner.
4. Snap the hose into the hose cuff on the
side of the vacuum cleaner
I i
CAUTION
|Do not operate the agitator without the|
|wand properly inserted into the wand|
|holder and the hose properly secured in|
_the hose holder J
• _ _ 5. Rotate the hose
___ release lever
upwards to lock
the hose in place.
COMBINATION BRUSH
Combination
Brush --
1. insert the combination brush into the
holder on the back of the vacuum cleaner
as shown.
=8=