Power Cord - Kenmore 116.31200 Manual De Uso Y Cuidado

Ocultar thumbs Ver también para 116.31200:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

_CAUTION
Moving parts! To reduce the risk of personal injury,
DO NOT touch the agitator when vacuum cleaner is
on. Contacting the agitator while it is rotating can
cut, bruise or cause other injuries. Always turn off
and unplug from electrical outlet before servicing.
Use caution when operating near children.
\
POWER CORD
1. Turn the quick
release
upper
cord
hook
to
either
side and
down
to release
the power cord.
_WARNING
To reduce the risk of electric shock,
this vacuum
cleaner
has a polarized
plug (one blade
is wider
than the
other).
The plug will fit in a polarized outlet
only one way. If the plug does not fit
fully in the outlet, reverse the plug. If
it still does not fit, contact a qualified
technician to install the proper outlet.
Do not change the plug in any way.
2. Detach
the
power cord
plug
from the power
cord
and pull the
cord
off the
quick release
upper
cord
hook.
3. Be sure the power cord
is locked
into
the locking
notch of the upper cord
hook.
This wilt help manage
the cord
when
operating
unit
i
4. Plug the polarized
power cord
into a
120 Volt outlet located
near the floor.
_WARNING
Personal
Injury and Product Damage
Hazard
* When any abnormality/failure
occurs,
stop using the product immediately
and disconnect the power ptug.
DO NOT use outlets above counters.
Damage from cord to items in
surrounding area could occur.
5. To restore
cord,
after
use turn upper
cord
hook to the up position,
then wrap
cord
loosely
around quick release cord
upper
hook and carrying
handle.
WARNING
Electrical Shock And Personal Injury Hazard
Wrapping the cord too tightly
puts stress on
the cord
and can cause cord
damage.
A
damaged
cord is an electrical
shock hazard
and could cause personal injury or damage.
- 10 -

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido