Safety Measures - Targus AMP13EU Guia Del Usuario

Targus Laser Presentation Remote
Press and hold for 3 seconds to turn on the remote.
LED ring will turn green.
1
Power button
Press and hold for 3 seconds to turn off the remote.
LED ring will shut off.
2
Blank screen button The screen will become blank/dark.
Start - Press once to begin.
3
Slide show
Stop - Press and hold for 2 seconds to stop the slide
show.
4
Page Forward/Next slide Press once to go to next slide.
Page
5
Press once to go back one slide.
Backward/Previous slide
6
Laser pointer Laser light is emitted from the opening.
7
LED ring Power and KeyLock
Press once to enable KeyLock function.
- Disables all keys except the laser, page forward/ next
slide and page backward/previous slide buttons.
8
KeyLock button
- LED ring will become RED.
Press once to exit the KeyLock function.
- LED ring will return to GREEN.
9
Laser pointer button Press and hold to activate the laser pointer.
12
indicator.
TM
Targus Laser Presentation Remote

Safety Measures

• To avoid possible eye damage, never point the remote's laser at people,
especially their faces, or look directly into the remote's laser beam.
• Avoid pointing the remote's laser beam at a mirror or other highly-reflective
surface.
• Keep the remote away from young children.
• Never view the remote's laser beam using telescopic devices, such as a
microscope or binoculars.
• Any attempt to disassemble, adjust or repair the remote may result in exposure
to laser light or other safety hazards.
Troubleshooting
What do I do if the response time of the remote is slow or it intermittently
stops working?
• Make sure that the remote is within 50 feet (15 m) of the mini USB receiver and
computer.
• Increase the distance between the remote's receiver and the base units of other
wireless devices.
• Turn off any wireless devices and their base units that are near the remote's
receiver.
• Replace the battery.
13