Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
5. After the refrigerator has connected to your network, you can press the IP Address button on the Wi-Fi
Networks screen to view the current IP address and Gateway values.
6. If you need to enter the IP Address, Subnet Mask, Gateway, and DNS manually, press the User Config
button on the IP Address screen. Then, touch the IP Address, Subnet Mask, Gateway, and DNS
buttons in turn and, using the keypad, enter the appropriate values. When you are done with each
entry, touch the OK button on the keypad.
7. After entering the values for all four parameters, touch the
Apply button.
TEMPERATuRE uNIT cONVERTER
Lets you set the temperature display to Fahrenheit or Centigrade. The unit you select applies to the Freezer /
Fridge set temperature and the temperature displayed by the Weather function.
1. Touch the
2. Select the Temperature Unit Converter °C or °F button in the Settings list.
62_ operating
button in the bottom right corner of the Settings list two times.
Publicidad
Tabla de contenido
