Raider RDI-CDB01 Instrucciones De Uso Originales página 12

12 www.raider.bg
1.4.4. Keep your cutting tools well sharpened and always clean. Properly maintained cutting tools
with sharp edges have less resistance and working with them easier.
1.4.5. Use the cordless drill, attachment, working tools, etc., according to the manufacturer's
instructions. In doing so must comply with specific operating conditions and operations to perform.
Using a cordless drill than those provided by the manufacturer applications increases the risk of
accidents.
1.5. Instructions for safe handling, specific for your purchased cordless drill.
Loss of control over power tool could lead to the occurrence of accidents.
1.5.1. Do not use additional devices which are not recommended by the manufacturer for this
particular power tool. The fact that you can attach to specified device or machine working tool does
not ensure safe working with him.
1.5.2. Never put your hands near the rotary working tools.
1.5.3. If you perform activities which threaten to fall working tool of hidden wires under tension,
hold power tool only electric insulated handles. When entering the working tool in contact with the
wires under tension, it is transmitted through the metal details of the cordless drill and this may lead
to electric shock.
1.5.4. Use appropriate instruments to find any hidden beneath the surface pipelines, or contact
the appropriate local supply company. Into contact with the wires under tension can cause fire or
electric shock. Pipeline damage can lead to explosion. Deterioration of water has the effect of major
material damage and may cause electric shock.
1.5.5. Provide workpiece.
Detail, and attach with appropriate appliances or braces is anchored more firmly and securely than
if you hold it by hand.
1.5.6. Regularly clean your vent cordless drill.
1.5.7. Use only recommended battery and charger.
1.5.8. Keep the battery away from heat sources. Do not leave the battery for a long time in high
temperature (in direct sunlight, in proximity of heaters and wherever the temperature exceeds 50°C).
1.5.9. The battery charging time cannot be longer than 1.5 hours. Otherwise the battery may be
damaged.
1.5.10. Avoid charging the battery in temperatures lower than 0°C.
1.5.11. Charger supplied with the drill is designed for operation with this product only. Do not use
it for other purposes.
1.5.12. Do not put any metal objects into the charger.
1.5.13. Do not change direction of spindle rotation when the tool is operating. Otherwise drill may
be damaged.
1.5.14. To clean the drill use soft, dry cloth. Never use detergents or alcohol.
1.5.15. Disconnect charger from power supply before cleaning.
1.5.16. If you plan to charge more than one battery successively, make a 30 minute break
between charging.
1.6. Special conditions regarding safety of charger operation.
Before using the charger read all relevant information contained within this manual, see markings
on the charger and the product it is designed for.
1.6.1. To reduce the risk of potential personal injuries use the charger for nickel-cadmium (Li-ion)
batteries only. Other type batteries may explode and cause personal injury or material damages.
1.6.2. Do not expose the charger to moisture or water.
1.6.3. Use of any connecting elements not supplied or not recommended by the manufacturer of
the charger may cause fire, personal injury or electric shock.
1.6.4. Make sure the power cord is not located in pathway. It is not exposed to treading or other
danger (e.g. strong tension).
1.6.5. Do not use extension cord unless it is absolutely necessary. Use of improper extension
cord may cause fire or electric shock. If it is necessary to use extension cord, first make sure that,
extension cord socket matches plug prongs of the original charger power cord.
1.6.6. Extension cord is in good technical condition.