Installation Of Nc4 On The Machine Table - Allmatic NC4 Serie Manual De Instrucciones

ALLMATIC
7

Installation of NC4 on the Machine Table

Ø Check clamping surfaces for cleanliness and unevenness before installation.
WARNING
Falling of the NC4.
Crushing of hands and feet.
Ø Use suitable lifting gear only.
Ø Wear personal protective equipment.
NOTICE
Wear safety shoes!
NOTICE
Wear safety gloves!
During installation, make sure that the clamping claws are fixed directly underneath
the jaws!
NC4
Installation of NC4 on the Machine Table | 7
EN
53 / 376