Safety Instructions; 1�1 General - Goobay SPW IT 1000 Instrucciones De Uso

1

Safety instructions

1.1 General
The user manual is part of the product and contains important information for cor-
rect use.
• Read the user manual completely and carefully before use�
The user manual must be available for uncertainties and passing the product.
• Keep this user manual�
Risk of electric shock
• Do not operate the device with wet hands!
• Attend to the maximum output currents of the product!
• Do not open the housing�
• Do not modify product and accessories�
• Do not short-circuit connectors and circuits�
• Do not insert objects into air vents or sockets!
A defective device may not be put into operation, but must be protected against
further use.
• Use product, product parts and accessories only in perfect condition�
• In case of questions, defects, mechanical damage, trouble and other pro-
blems, non-recoverable by the documentation, contact your dealer or pro-
ducer�
• Installation, assembly, maintenance and repair work must be carried out
only by trained electrical specialists�
Not recommended for children and people with physical and / or mentally limited
capabilities.
• Secure packaging, small parts and insulation against accidental use�
• Avoid stresses such as heat and cold, moisture and direct sunlight, micro-
waves, vibrations and mechanical pressure�
• Never let the product unattended when in use�
• Never operate irons, radiant heaters and similar devices that are a fire ha-
zard via voltage transformers�
• DO NOT connect devices connected to the product via other interfaces on
the vehicle at the same time�
• Use the product with running engine to avoid fast dicharging of the battery�
• Use the product only when the vehicle is parked�
• Disconnect the product from the vehicle battery before driving�
• The vehicle controls must not be affected by the installation and use of the
product�
Explosion hazard
• Do not operate the product in an explosive environment�
• Do not use the product near flammable surfaces and substances and ex-
plosive materials�
Hot surfaces
• Do not touch the housing during or immediately after use�
• Do not place any combustible materials (paper, cardboard, plastic, etc�) on
the product�
• Do not cover cooling fins and fans.
• Do not use the product in sealed environments�
The unit heats up during operation.
EN
12