Power Adapter; Special Functions - HoMedics BMS-10H Manual De Instrucciones E Información De Garantía

B o d yM a s s e u r
O n / O f f
C y c l e
To turn on the massage
functions, first press the
Press CYCLE to activate
POWER button. The L. E. D
traveling massage. The L. E. D.
indicator will illuminate and
light corresponding to the
confirm your selection. To
cycle button on the hand
turn off the massage
control will illuminate to verify
functions, simply press the
your selection. Motors will
button again.
alternate massage action,
starting at your neck and
shoulders and travelling down
to your feet, up and down the

Power Adapter

cushion's surface. To deac-
tivate cycle action, simply
Body Masseur is powered
press the button again and the
by a custom 120 volt AC
corresponding L. E. D. light will
home adapter, included
turn off. At any time, you may
with your unit.
disengage any one or any
combination of massaging
motors. When you do, corre-
sponding L. E. D. lights will
indicate your selection.
Note:
When selecting the
heat feature with massaging
action, there will be a slight
decrease in the strength of
the massage output. This
adjustment is perfectly
normal and should not be
interpreted as a defect.
10-motor Full Body Massager
Targeted
M a s s a g e
Buttons
Press to activate
massage of
specific areas:
n e c k / s h o u l d e r s ,
back, buttocks,
thighs and
calves/feet. Custom
program your massage
by choosing a specific
area, any combination of
areas, or all five. The corre-
sponding L. E. D. lights will
illuminate to verify your
selection. To deselect, simply
press the buttons again and
their corresponding L. E. D.
lights will turn off.
6
H e a t
Cycle Speed
Soothing, penetrating heat is
Choose the speed at which
activated with this button. To your custom programmed
turn off heat, simply press the massage travels up and
button again. A glowing L. E. D. down Body Masseur. Wi t h
light indicates that heat is on. each press of the button,
the cycle speed increases,
creating three levels: low (L),
medium (M) and high (H).
Corresponding L. E. D. lights
will indicate your selection.
To decrease speed, simply
press the button again.
M a s s a g e
Strength
Choose the intensity of
your massage. Body
Masseur gives you three
options of massage
strengths: low (L),
medium (M) and
high (H). L. E. D. lights cor-
respond to your
selection. To change
the strength of your

Special Functions

Body Masseur incorporates
3 exclusive preprogrammed
functions that can be easily
selected by pressing the
SPECIAL FUNCTIONS
button. Once activated, you
can move from one function
to another by simply
press-ing the button again.
All 3 special functions allow
you to choose the body
zones activated, and the
speed and intensity of your
m a s s a g e .
(F1) Pu l s a t i n g
Massage:
vibrating motors turn
on and off, giving you
an intense pulsating
m a s s a g e .
(F2) S i d e - t o - s i d e
Massage:
the massage back and
forth, from your left
side to your right.
(F3) C i r c u l a t i n g
Massage:
runs in circular fashion
around the cushion
surface, to reflect your
massage, simply
blood's circulation.
press the corre-
sponding button.
7
All 10
Switches
M a s s a g e