Error Messages - Karibu 70444 Instrucciones De Montaje Y De Servicio

Instructions for installation and use

10.3. Error messages

Error messages in the display 2
An error message indicates an electrical malfunction in the system. The sauna
control unit is no longer operational.
1. Note the error message.
2. Switch off the sauna control unit.
3. Switch off the main fuse of the sauna control unit in the fuse box.
4. Contact customer service.
Error
E-F1 Short circuit/broken wire/heater sensor defective.
E-F2 Short circuit/broken wire/bench sensor defective.
E-12 Broken wire or damage to the excess temperature protection.
E-P1 Software error
E-P3
WORLD OF WELLNESS
Description
p. 21/22
EN