Picture Control; Sound Mode; Stereo Sound Mode; Virtual Surround - Denon DVD-1930CI Instrucciones De Funcionamiento

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

DISC PLAYBACK
NOTE:
• If the ANGLE ICON setting is OFF in the Display menu,
the (
) will not appear.

Picture Control

Picture Control adjusts Brightness, Contrast, Color, Gamma
Correction and Sharpness of the specific display.
1
During playback, press the
MODE button.
2
Press the Cursor buttons (K
or L) to switch among items.
3
Press the ENTER button or the Cursor buttons (s or
B) to adjust the selected item to a desired level.
• -6, -5, -4, -3, -2, -1, 0, +1, +2, +3, +4, +5, +6 can be selected.
4
To return to normal playback, press the RETURN
button.
NOTES:
• The default settings for all items in Picture Control are "0".
• The setting display will disappear in 10 seconds of no use.
• This function cannot be used during Dialog Speed
(refer to page 23).
• If you return all items to the default settings please
execute initialize.

Sound Mode

This function allows you to select a desired sound mode dur-
ing DVD-Audio playback.
1
Press the AUDIO button during playback.
2
Press the AUDIO button repeatedly to select your
desired sound.
NOTE:
• When selecting a multi-
channel sound, it may
not mixed down in
some cases even
though the HDMI
AUDIO or ANALOG
AUDIO is 2 CHANNEL.

Stereo Sound Mode

1
Press the AUDIO button repeatedly during play-
back to select your desired sound mode.
STEREO - both right and left channels are active (stereo)
L-ch
- only left channel is active
R-ch
- only right channel is active
STEREO
L ch
R ch
NOTE:
• The STEREO can only be output when playing back
DTS CD.
DVD-V
DVD-A
s +1B
BRIGHTNESS
DVD-A
1 LPCM 3/2 1ch 96k/2
2 PPCM 2/0ch 96k/2
CD
Both right and left channels
are active (stereo).
Only the left channel
is active.
Only the right channel
is active.
– 24 –
1
Press the SUPER AUDIO CD SET UP button
repeatedly to select among MULTI-CH AREA, CD
AREA, or 2CH AREA.
MULTI-CH AREA - Playback in multi channel format.The
number of channels depends on the disc
being played.
CD AREA
- Playback in the same quality with sound
as normal CDs.
2CH AREA
- Playback in higher quality than that of
normal CD sound.
MULTI CH AREA
CD AREA
2CH AREA
NOTES:
• The Virtual Surround setting is not available for Super
Audio CDs. (It may be possible to use the Virtual Surround
setting when playing back discs that include a CD area.)
• Some playback options may not be available.These will
be skipped.
• MULTI-CH AREA is selected as default.

Virtual Surround

DVD-V
DVD-A
You can enjoy surround-sound effect with two speakers.
1
During playback, press the
MODE button repeatedly until the
Virtual Surround setting appears.
2
Press the ENTER button to set it 1(Natural effect),
2(Emphasized effect) or OFF.
3
Press the RETURN button to exit.
NOTES
:
• Select Virtual Surround OFF or lower the volume if the
sound is distorted.
• Virtual Surround will not be effective if the sound mode
is set to something other than STEREO (for Audio CD
playback only).
• This function cannot be used during Dialog Speed
(refer to page 23).
• Set HDMI AUDIO and ANALOG AUDIO to 2 CHANNEL
to use this function.
• The Virtual Surround setting is not available for Super
Audio CDs. (It may be possible to use the Virtual Surround
setting when playing back discs that include a CD area.)

Black Level Setting

Adjust the Black Level Setting to make the black parts of the
picture as bright as you prefer.
1
During playback, press the
MODE button repeatedly until
Black Level setting appears.
2
Press the ENTER button to switch ON/OFF.
ON (Default) : Makes the dark parts brighter.
OFF : Shows the original picture as recorded.
3
Press the RETURN button to exit.
NOTE:
• This function cannot be used during Dialog Speed
(refer to page 23).
Super
Audio CD
SACD
SACD
front panel display
CD
MP3
WMA
OFF
DVD-V
DVD-A
ON
EN

Publicidad

Tabla de contenido
loading

Tabla de contenido