Audio Setting; Dolby Digital; Speaker Setting For Analog Audio - Denon DVD-1930CI Instrucciones De Funcionamiento

DVD SETUP

Audio Setting

You can change some Audio settings. It only affects during the
playback of DVD discs.
1 Press the SETUP button in stop mode.
Press the Cursor buttons (s or B) to select
2
CUSTOM, then press the ENTER button.
• The custom mode will appear.
Press the Cursor buttons (s or B) to select
3
AUDIO, then the ENTER button to confirm.
Press the Cursor buttons (K or L) button to select
4
an item, then press the ENTER button.
• This menu display contains 2 pages. Press the Cursor
L
button ( ) repeatedly to show the next page.
AUDIO
DRC ON
LPCM SELECT OFF

DOLBY DIGITAL

BITSTREAM
DTS BITSTREAM
BASS ENHANCER OFF
AUDIO MODE HDMI
HDMI AUDIO 2 CHANNEL
DRC (Dynamic Range Control)
(Default : ON)
• DRC function compresses the
range of sound volume.
• DRC function is available only on
the discs that are recorded in the
Dolby Digital format.
LPCM SELECT (Default : OFF)
• Set to ON when outputting in
48kHz (or 44.1kHz).
• This function is available only on
digital outputting of a disc record-
ed in over 96kHz (or 88.2kHz).
• Sounds of the DVD-Audio which
exceed 96kHz (or 88.2kHz) will be output as 96kHz (or
88.2kHz) even if LPCM SELECT is set to OFF.
• This function is not effective for the HDMI sound output.
When playing disc with copyright protection
• The sound will be down sampled at 48kHz (44.1kHz),
even if you set to OFF.
DOLBY DIGITAL
(Default: BITSTREAM)
• Set to BITSTREAM when the play-
er is connected to a Dolby Digital
decoder.
• This function is effective only for
the COAXIAL, OPTICAL and HDMI
connections.
BITSTREAM:
DOLBY DIGITAL signals are output as Bitstream.
• For HDMI connection, if the connected equipment
is not compatible with the Dolby Digital
BITSTREAM, the signals are output as PCM
regardless of the setting.
PCM: Convert Dolby Digital to PCM.
DTS
(Default : BITSTREAM)
• Set to BITSTREAM when the unit
is connected to a DTS decoder.
BITSTREAM:
DTS signals are output as
Bitstream.
• For HDMI connection, if the connected equipment is
not compatible with the DTS Bitstream, the signals
are output as PCM regardless of the setting.
PCM: Convert DTS to PCM.
AUDIO
ANALOG AUDIO 2 CHANNEL
AUDIO
DRC ON
LPCM SELECT OFF
DOLBY DIGITAL BITSTREAM
DTS BITSTREAM
BASS ENHANCER OFF
AUD O MODE HDMI
HDMI AUDIO 2 CHANNEL
AUDIO
DRC ON
LPCM SELECT OFF
DOLBY DIGITAL BITSTREAM
DTS BITSTREAM
BASS ENHANCER OFF
AUD O MODE HDMI
HDMI AUDIO 2 CHANNEL
QUICK
AUDIO
DRC ON
LPCM SELECT OFF
DOLBY DIGITAL BITSTREAM
DTS BITSTREAM
BASS ENHANCER OFF
AUD O MODE HDMI
HDMI AUDIO 2 CHANNEL
QUICK
AUDIO
DRC ON
LPCM SELECT OFF
DOLBY DIGITAL BITSTREAM
DTS BITSTREAM
BASS ENHANCER OFF
AUD O MODE HDMI
HDMI AUDIO 2 CHANNEL
BASS ENHANCER (Default: OFF)
• Set to ON for sound output on the
bass-woofer channel when 2-chan-
nel audio source is played back.
• This function is effective only for the
5.1ch AUDIO OUT jacks. Set the
AUDIO MODE to ANALOG and
ANALOG AUDIO to MULTI CHANNEL to set this function.
• When SUB WOOFER is set to NONE in the Speaker
Configuration, BASS ENHANCER will be set to OFF
automatically.
AUDIO MODE (Default: HDMI)
• Select the sound is output from
whether HDMI jacks or 5.1ch
AUDIO OUT jacks.
HDMI: Sound is output via HDMI
connection. Output from
5.1ch AUDIO OUT connection may be restricted.
ANALOG: Sound is output via 5.1ch AUDIO OUT jacks.
Output from HDMI connection is cut off.
• Set to ANALOG when Super Audio CD is played back.
HDMI AUDIO (Default: 2 CHANNEL)
• Select the number of channels for
HDMI audio output between 2
CHANNEL and MULTI CHANNEL.
• Refer to the table on page 15 for
the actual output settings.
• Connect appropriate external
equipment for each setting and set AUDIO MODE to
HDMI beforehand to perform this setting.
2 CHANNEL:
2 channel signals are output from HDMI jack. Suitable
for monitors or projectors compatible with HDMI 2CH.
MULTI CHANNEL:
Multi channel signals are output from HDMI jack.
Suitable for monitors or amplifiers compatible with
HDMI multi channels.
• When MULTI CHANNEL is selected, the Speaker setting
menu for HDMI AUDIO will appear (refer to page 27).
ANALOG AUDIO (Default : 2 CHANNEL)
• Set AUDIO MODE to ANALOG beforehand to perform
this setting.
• 2 CHANNEL : Output 2ch sound from the 5.1ch AUDIO
OUT jacks.
• MULTI CHANNEL : Output Multi channel sound from
AUDIO
ANALOG AUDIO 2 CHANNEL
5 Press the SETUP button to exit and activate the
new settings.

Speaker Setting for ANALOG AUDIO

When MULTI CHANNEL is selected for ANALOG AUDIO,
some speaker settings will be required.
• Set AUDIO MODE to ANALOG beforehand to perform
this setting.
1 Press the Cursor buttons (K or
L) to select MULTI CHANNEL,
then press the ENTER button.
2
Press the Cursor buttons (K or
L) to select the below items,
then press the ENTER button.
• The custom mode will appear.
– 26 –
AUD O
DRC
LPCM SELECT
DOLBY DIGITAL
DTS
BASS ENHANCER OFF
AUDIO MODE
HDMI AUDIO
AUD O
DRC
LPCM SELECT
DOLBY DIGITAL
DTS
BASS ENHANCER OFF
AUDIO MODE
HDMI AUDIO
AUD O
DRC
LPCM SELECT
DOLBY DIGITAL
DTS
BASS ENHANCER OFF
AUDIO MODE
HDMI AUDIO
the 5.1ch AUDIO OUT jacks.
AUDIO
ANALOG AUDIO
2 CHANNEL
MULTI CHANNEL
AUD O
MULTI CHANNEL
Speaker Conf guration
DELAY TIME
CHANNEL LEVEL
ON
OFF
BITSTREAM
BITSTREAM
HDMI
2 CHANNEL
ON
OFF
BITSTREAM
BITSTREAM
HDMI
2 CHANNEL
ON
OFF
BITSTREAM
BITSTREAM
HDMI
2 CHANNEL
EN