Announcing A Caller; Audio Indicators; Selecting A Language - Motorola IHF1000 Manual De Instrucciones

Announcing a Caller

To turn the Caller Announce function On or Off:
Action
1 Press the TALK button.
2 When prompted, say "Setup Menu."
3 Say "Caller Announce On" or "Caller Announce
Off."
The system responds: Caller Announce On or Caller
Announce Off.

Audio Indicators

When the system is not in a call or an active SR session,
you may hear the following audio indicators:
Audio Indicator Description
New voicemail message
You have a voicemail (You have
a voicemail message). received.
You have a new message. New SMS message
received.
Phone battery low. Low battery.
Note: These indicators are turned off when you turn off
prompts.

Selecting a Language

Note: When you change your system's language, all
contacts in your Contacts list are deleted.
Action
1 Press and hold the END button, turn on the vehicle
ignition, and continue holding the END button for at
least 10 seconds.
The system enters language selection and responds:
Language Menu. Press volume up or down to change language.
2 Use the Volume UP/DOWN buttons to scroll through
the language choices.
As you scroll to a language, the system plays the
prompt for that language. (For example: English. To
choose this language, restart the vehicle.)
3 When you have selected the desired language, turn
off the vehicle ignition.
The next time you turn on the vehicle ignition, the
new language is loaded.
39 40