Examples - Robertshaw SER Serie Manual De Instalación, Operación Y Mantenimiento

INSTALLATION EXAMPLES
It is the responsibility of the installer to ensure all ductwork is sized and installed as designed to ensure the system will perform as
intended. All air movement devices have a performance curve. The amount of air (CFM) that an ERV will deliver is directly related
to the total external static pressure (E.S.P.) of the system. Static pressure is a measure of resistance imposed on the blower by
length of duct work/number of fittings used in duct work, duct heater etc.
Fully Dedicated System
(new construction)
Stale air drawn from key areas
of home (bathroom, kitchen,
laundry)
Fresh air supplied to main liv-
ing areas
ERV must be balanced
12
Example diagram only-duct configuration may change depending on model
Bedrooms
Fresh Air
ERV
18 inches
(460 mm)
Exhaust Air
Exhaust
Bathroom
Central Control - optional
Fresh air to living room