Energy Recovery Ventilator
FEATURES
• Compact design
• Backward curved impellers
• Electrostatic filters (washable)
• Enthalpy energy recovery core
• External screw type dry contacts for optional controls
• Improved core guide channels for easy removal of core
WARRANTY
• 7 year on motors
• 5 year on parts
• 5 year on core (limited)
Distributed by:
Robertshaw, reserves the right to modify, at any time and without notice, any or all of its products'
features, designs, components and specifications to maintain their technological leadership position.
SER Series
7604-003
SPECIFICATIONS
CASE 24 gauge galvanized steel. Baked powder coated paint,
antique white. Insulated with 1" (25 mm) high density
polystyrene foam to prevent condensation and meet the
requirements of the Underwriters Laboratories 94HF.
MOTORS Two (2) German-engineered, factory-balanced
ebm™ motors with backward curved blades. Motors come
with permanently lubricated sealed ball bearings guarantee
long life and maintenance-free operation. Seven (7) year
warranty.
CORE A enthalpy energy recovery core configured for an
efficient cross-flow ventilation. Core is 9" x 9" (229 x 229
mm) with a 15" (380 mm) depth. Cores are manufactured to
withstand extreme temperature variations.
FILTERS Two (2) Washable Electrostatic Panel Type Air Filters,
they are 8.5" (216mm) x 15" (380mm) x 0.125" (3mm).
PORT SELECTION (Reversing Unit) Units are shipped
indicating airflow (see "Dimensions & Airflow" on next page).
These ports can be selected on site by the installer and
changed around as needed. IE "Exhaust Air From Building"
could be changed to "Air From Outside" and "Exhaust To
Outside" switched to "Air To Building". The same is true for
the other ports. This gives the installer greater flexibility in
placement of the unit and ductwork.
INSTALLATION Unit is typically hung by using installation kit
supplied with unit. Mounting bolts provided on top four (4)
corners of unit.
SERVICEABILITY Core, filters, and motors can be easily
serviced through latched access door. Core conveniently
slides out with ease on an improved railing system. Electrical
box, placed on the outside of the unit, can also be easily
accessed.
NOTE This model is not recommended for climates that
experience temperatures below 23˚F (-5˚C) for more than 2
consecutive days.
3