Dru 55CB Instrucciones De Instalacion Y Uso página 34

3 back inner plate on the left and right
4 inner plate on the left and right side
5 baffle plate
6 fire basket
7 ash pan
Connecting to the back
1. Apply supplied glass fibre sealing tape (2)
measuring 10 x 3 mm to the contact surface of the
connection collar (8).
2. Remove the protection plate from the back shield
with the assistance of a screwdriver; see following
figure.
3. Remove the cover (1) from the back wall.
4. Install the connection collar to the back wall with
the materials.
5. Install the cover in the top plate using the
mounting bracket (4).
10
1
2
3
4
5
6
Connecting to the top
On delivery, the connection at the rear is closed, so
that a back cover does not need to be installed.
Because of the distance to the (combustible)
wall, the protection plate in the back shield may not be
09-20008-005
removed.
1. Apply supplied glass fibre sealing tape (3)
measuring 10 x 3 mm to the contact surface of the
connection collar (2).
2. Affix the connection collar to the top plate with the
materials supplied.
Subject to change because of technical improvements
7 2 8
10
9
09-20021-057