Introduction - NIOSH RPB T-LINK Manual De Instrucciones

INTRODUCTION

The RPB T-LINK is approved by NIOSH in the following category:
® ®
 Powered Air Purifying Respirator - When used with the PX4 AIR

Type C Supplied Air Respirator - When used with RPB
System.
The T-LINK is a multiuse respirator for a number of different applications where there is a need for
®
protection from airborne contaminants, eye/face protection and head protection; such as painting,
chemical handling and other industrial applications. When the Zytec
be used for grinding, brazing, and other industrial applications where fire retardant is needed.
The T-LINK is tested and certified for the following standard when equipped with the optional Hard
®
Hat Shell (16-511):

Head protection to the ANSI Z89.1 standard.
It is also approved for the following standard when quipped with the Safety Lens:
 Eye and face protection to the ANSI Z87+ standard.
The T-LINK has been designed for use in atmospheres that are NOT IMMEDIATELY DANGEROUS
®
TO LIFE OR HEALTH (IDLH).
The T-LINK is approved for use with the following breathing air sources:
®
03-901 RPB PX4 air powered air purifying respirator (refer to PX4 PAPR Instruction manual for
®
instructions on setting up for use with the papr)
03-101 Constant Flow Valve
03-500 C40 Climate Control Device
WARRANTY
All RPB products are covered by a manufacture's warranty of 3 months. The manufacturer
®
warranty covers defects in material, workmanship and does not cover damage caused by misuse
or abuse. RPB 's only obligation and your exclusive remedy shall be to repair, replace or refund
®
the purchase price of such parts or products upon the presentation of proof of purchase. Maximum
liability is in no case to exceed the value of the RPB
4
PAPR unit.
®
Supplied Air Hose and Flow Device
®
material is used, the hood can
®
product involved.
®