Turbothrust Saw® Components; Technical Information - Thane Turbothrust Saw Manual De Instrucciones

settle on exposed skin. This can lead to the absorption of
toxic chemical substances.
• Keep dust particles away from your face and body.
2.5 Safe Use of Power Tools
Follow the instructions below when using Turbothrust
Saw®.
• Do not use the power tool if you cannot switch it on or off
using the switch. A tool that cannot be switched on or off
using the switch constitutes a hazard and must be repaired
by an authorized technician.
• Unplug the tool from the power supply before making any
adjustments, changing the accessories or putting it away.
These measures will reduce the risk of the tool being swit-
ched on by accident.
• Keep power tools out of reach of children. Do not allow
anyone to use Turbothrust Saw® if they are not familiar with
its use or have not read these instructions.
• Keep power tools well maintained. If your Turbothrust
Saw® is missing any parts or any of its parts are damaged,
they must be replaced before you can use it.
• Keep any cutting tools sharp and clean. If cutting tools are
well maintained and have sharp edges, they are less likely
to become stuck and are easier to control.
• Only allow authorized technicians to repair your Tur-
bothrust Saw®.
• Use a suitable fastening system to affix and support the
piece you are working on and provide a stable platform.
Holding the piece with your hand or against your body will
cause it to become unstable and may cause you to lose
control.
• Only use accessories that are recommended for use with
Turbothrust Saw®.
• Never use Turbothrust Saw® in the presence of volatile
or flammable substances, or use volatile substances to
clean it.
3. Turbothrust Saw® Components (Image A)
The following components are included with your Tur-
bothrust Saw®:
Component Description
A.1 Turbothrust Saw® rotary power tool
A. 2 Turbothrust Saw® base and cutting gui-
de
A. 3 Turbothrust Saw® circular cutter
A. 4 Turbothrust Flex® rotary attachment
*The Turbothrust Flex® rotary tool is not included in
this set. You can acquire it by purchasing the following
set: TURBOTHRUST DRILL SAW AND OTHER AC-
CESSORIES
A. 5 Turbothrust Saw® dust extractor adaptor
A. 6 Chuck key, 16 mm
A. 7 Chuck, 3.2 mm (1/8")
A. 8 Chuck, 4.76 mm (3/16")
A. 9 Chuck, 6.35 mm (1/4")
The following accessories are also included:
- Diamond tile rasp
- Tile cutter
- Diamond tile hole saw, 25 mm
- Drywall bit
- Wood and multi-purpose bit (6.35 mm, 1/4")
- Wood and multi-purpose bit (3.2 mm, 1/8'')
- Wood and multi-purpose bit (4.8 mm, 3/16'')
- Wood and multi-purpose bit (3.2 mm, 1/8'')
- Wood and multi-purpose bit (3.2 mm, 1/8'')
- Straight router bit
- Profiling router bit
To see a list of the accessories that are included with Tur-
bothrust Saw®, consult the separate Turbothrust® Bits
workshop guide. (This is a practical workshop guide to help
you choose the right bit for the job at hand.)

4. Technical Information

Rated voltage: 230-240 V
Rated frequency: 50 Hz
Power: 400 W
Speed: 20, 000 rpm
Protection class: double insulation
Weight: 1.45 kg
Turbothrust Saw® Parts (Image B)
The illustrations show the different parts of the Turbothrust
Saw® rotary tool, the control handle (included) and the Tur-
bothrust Flex® rotary attachment.
B.1 Hanging loop
B. 2 Control handle lock screw
B. 3 Non-slip control handle
B. 4 Spindle lock button
B. 5 Guide stop lock screw
B. 6 Depth gauge lock screw
B. 7 Dust extractor adaptor
B. 8 Adjustable guide stop
Turbothrust Saw® circular cutter (Image C)
C.1 Hanging loop
C. 2 ON/OFF switch
C. 3 Easy-grip control handle
C. 4 Chuck nut
C. 5 Internal mounting disc
C. 6 External mounting disc
C. 7 Circular cutter handle
C. 8 Pivot lock screw
C. 9 Centre guide pivot
C. 10 Circular cutter guide
Turbothrust Flex® rotary attachment (Image D)
*The Turbothrust® Flex rotary tool is not included in this set. You can acquire
it by purchasing the following set: TURBOTHRUST SAW ROTARY TOOL KIT.
D.1 Rear section of the Turbothrust Flex® rotary tool
D. 2 Flexible rod
D. 3 Spindle lock button
D. 4 Chuck nut
D. 5 Front section of the Turbothrust Flex® rotary
tool