Personal Safety - Marson BT-2A Instrucciones Originales De Uso

is suitable for outdoor use reduces the risk of an
electric shock.
If the use of the riveter in a damp environ ment is
unavoidable, use for the fast charger a residual
current circuit breaker. Use of a residual current
circuit breaker reduces the risk of an electric shock.

PERSONAL SAFETY

Be careful, pay attention to what you are
doing and work sensibly when using a
riveter.
Do not use a riveter when you are tired or under
the influence of drugs, alcohol or medication. One
moment of inattention when working with the rivet-
er can result in serious injuries.
Wear personal protective equipment and
use protective goggles at all times. The
wearing of personal protective equipment
such as a dust mask, non-slip safety
shoes, a helmet or ear protectors, depending on
the type and application of the riveter, reduces the
risk of injuries.
Avoid inadvertent starting of the riveter. En sure
that the riveter is switched off before attaching the
battery (F), picking it up or carrying it. Having your
finger on the trigger when carrying the riveter can
lead to accidents.
Remove the setting tools or wrenches before
switching on the riveter. A tool or wrench connect-
ed to a rotating part of the riveter can result in
injuries.
Avoid abnormal body postures.
Ensure a secure footing and maintain your balance
at all times. This will enable you to control the
riveter in unexpected situations.
Wear suitable clothing. Do not wear loose clothing
or jewellery. Keep hair, clothing and gloves away
from moving parts. Loose clothing, jewellery or
long hair can become entangled in moving parts.
If the mandrel collecting containers can
be fitted, ensure that they are properly
connected and used correctly. By-pass-
ing of the safety switch is prohibited.
DIMENSIONS AND DESCRIPTION
OF THE TOOLS
A Nose piece
B Front sleeve
C Hole for hanger clip
D Fault indicator (red/yellow LED)
E Mandrel collecting container
F Battery with charging status indication
G Battery lock/release (latch)
H Riveting point light (white LED)
I Trigger
BT-2A
inch dim.
d .906
l1 2.606
l2 11.063
h 10.827
b 2.992
BT-3A
mm inch dim.
23 .906
66 3.110
281 12.205
275 11.142
76 2.992
English | 7
mm
23
79
310
283
76