Technical Data - Marson BT-2A Instrucciones Originales De Uso

TECHNICAL DATA

Nom. blind rivet working range [Ø]
Max. stud diameter
Riveter weight incl. battery
Total stroke
Drive (DC / BLDC)
Tensile force
Sound emissions LpA / K // LWA / K [dB]
Vibrations ah / K [m/s²]
Service interval [number of rivets]
Battery
Battery
Battery cells [number]
Battery weight
Battery working temperature
Charger input voltage [V AC / Hz]
Charger output voltage [V DC]
Charger output current
Charger working temperature
Charger charging time to 90 % / 100 %
Charger weight without cable
OPERATION AND HANDLING OF
THE RIVETER
Do not overload the tool. Use the proper
riveter for your work. You will work better
and safer in the specified performance
range by using the appropriate riveter.
Do not use a riveter whose switch is defective. A
riveter that can no longer be switched on or off is
dangerous and must be repaired.
Remove the battery (F) before making
adjustments to the tool, changing
accessories or putting the tool away. This
precautionary measure prevents any
unintentional starting of the riveter.
Keep the riveter out of the reach of children when
not in use. Do not allow persons to use the tool
8 | English
BT-2A
3/32" - 3/16" /
2.4 mm - 5.0 mm
.134" / 3.4 mm
4 lbs / 1.8 kg
.826" / 21 mm
DC
2,248 lbs / 10,000 N
<65 / 3 // <76 / 3
< 2.5 / 1.5
100,000
16 V
2.0 Ah
4
0.71 lbs / 0.32 kg
23 deg F to 113 deg F / -5°C to 45°C
100 to 240 / 50 to 60
7.0 to 21.0
32 deg F to 104 deg F / 0°C to 40°C
22 min. / 30 min.
1.21 lbs / 0.55 kg
who are not familiar with it or who have not read
these instructions. Riveters are dangerous if they
are used by inexperienced persons.
Maintain riveters with care. Check that moving
parts function correctly and do not jam, and that
parts are not broken or damaged in such a way
that the function of the riveter is impaired.
Have damaged parts repaired before using the
tool. Many accidents are caused by poorly serviced
riveters.
Use riveter, accessories, attachments, etc. only
as described in these instructions. Give consid-
eration to the working conditions and the work to
be carried out. The use of riveters for other than
the intended applications can lead to dangerous
situations.
BT-3A
3/16" - 1/4" /
4.8 mm - 6.4 mm
.122" / 4.8 mm
4.5 lbs / 2.0 kg
1.181" / 30 mm
BLDC
4,496 lbs / 20,000 N
<74 / 3 // <85 / 3
300,000
20 V
5
0.82 lbs / 0.37
4 Ah