Thermostat Setting - Texi Apollo 68 Manual De Usuario

EN
PREPARATION
Caution!
•
Never try to use steam when tank is empty as it hurts pump.
•
Never fill tank with hot water.
•
Never add the materials containing alcohol, fragrant essences and so on to water.
PLUGGING IRON PRESS IN
•
Connect one side of the cord to the back of iron and another one to outlet.
•
Make sure that earth-connection is in good working order for your security.
•
After plugging in, press main ON/FF key.
•
Display screen Red light ring shows that heated sheet is warming up and steam
generator working.
CONTROL OF TEMPERATURE
When you turn iron on ,the temperature value will rise(the heating element work),
and stop after the temperature reaches the degree selected by cloth type selected
(the heating element stop).
SELECTION OF SUITABLE TEMPERATURE
The quality of press depends relatively on the number of the times you use steam
and also suitable temperature. Labels on clothes show their suitable temperature
for ironing by using the below international signs. Select these type of cloth with
respect to the label of what you want to iron.
Type of Cloth
Nylon
Silk
Wool
Cotton
Linen
NOTE! When you select the type of cloth, the cloth type light continual flashing ,the
heating element work, after the temperature reach, the light will stop flashing .
24

Thermostat Setting

65°C
110°C
140°C
160°C
180°C
Texi Apollo 68 / Texi Apollo 101
Amount of Steam
Dry or very little steam
A little steam
A little steam
Maximum Steam
Maximum Steam