Texi Apollo 68 Manual De Usuario página 25

PRODUCTION OF STEAM
After you press main ON/OFF key or plug iron in, Steam Generator starts working
automatically after 2 minutes.
PRESSING
•
Spread your material or cloth on iron sheet.
•
Move heated sheet down by handle.
When it gets to half-closed manner this appliance produces steam automatically
until whenever it is necessary.
•
Close iron for pressing automatically.
Keep iron closed for some seconds in order for the cloth to be dry and ironed
completely.
•
Open iron by lifting handle up.
•
Do not press handle more than usual while closing press. Press happens
automatically.
STEAM PRODUCTION FOR THE FIRST TIME
Your appliance is brand-new. Set up steam system for the first time in this way:
•
Fill up tank with water
•
Put anti-sediment cartridge into its place (Let extra water of tank pour out)
•
Put water tank back into its place.
•
Turn appliance on.
•
Upon readiness of iron for steam production, move handle up down to half-
closed manner.
STEAM BOOSTER
A) Ordinary System
•
Steam production key is on.
•
Move heated sheet down up to half to produce steam automatically.
B) Performance of Booster
•
Press the Booster key inside.
•
By moving the upper sheet down a strong flow of steam will be produced which
continues for some seconds and then returns to the usual manner of steam
spreading. This phenomenon is as a result of the automatic performance of
booster system. Close press system for ironing.
•
The Booster system will be activated again by reopening iron.
Texi Apollo 68 / Texi Apollo 101
EN
25