Safety Instructions - ANSMANN AES 1 Instrucciones De Servicio

GB INSTRUCTION MANUAL AES1
FOREWORD
Dear Customer, thank you for deciding to buy the ANSMANN Countdown Mains Timer
with energy saving Zero Watt Technology. With this intelligent mains timer you can
switch on attached loads (e.g. heaters, irons, coffee machines, printers, copiers and
many other devices) for a user selectable time period and reduce the standby electricity
costs for when they are not being used. Please read the operating instructions carefully
before use. Your ANSMANN Team

SAFETY INSTRUCTIONS

> Please read the operating instructions carefully and observe the safety instructions!
> Do not use the countdown mains timer if there are signs of any damage to the
housing or mains pins. Please contact an authorised dealer!
> Keep the countdown mains timer in a dry place!
> In order to avoid the risk of fire and/or electric shock, the countdown mains timer
must be protected against high humidity, water and heat!
> The maximum load of this mains timer is 2500 Watt or 10A. Make sure when you
connect devices that this value is not exceeded!
> Devices without mains cable connections that make mechanical movements or
vibrate should not be directly connected to the countdown mains timer!
> Before cleaning the unit, disconnect it from the mains and only use a dry cloth!
> Never attempt to open the countdown mains timer!
> Keep away from children's reach!
> The appliance is not to be used by children or persons with reduced physical, sensory
or mental capabilities, or lack of experience and knowledge, unless they have been