Safety Instructions - Beyerdynamic TG 100 Serie Manual Del Usuario

8
Thank you for selecting the TG 100 wireless system from beyerdynamic.
Please take some time to read carefully through this quick start guide before using the equipment.
For more extensive information, please refer to the TG 100 Handheld Set or TG 100 Beltpack Set manual and our
landing page on the internet at www.beyerdynamic.com/tg100. On the internet you will also find a list of plug adapters
available for individual countries.

1. Safety Instructions

1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not install near any heat sources such as radiators, heat registers, stoves or other apparatus (including
amplifiers) that produce heat.
8. Do not modify the power plug of this apparatus.
9. Protect the connecting cable from being walked on or pinched particularly at plugs, convenience
receptacles, and the point where they exit from the apparatus.
10. Only use attachments/accessories specified by the manufacturer.
11. Unplug this apparatus during lightning storms or when unused for long periods of time.
12. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged
in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into
the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been
dropped.
Exemption from liability
• beyerdynamic GmbH & Co. KG will not be liable if any damage, injury or accident occurs due to negligent,
incorrect or inappropriate operation of the prodcuts.
Location
• The equipment must be set up so that the power supply and all connections on the rear of the device are easily
accessible.
• If you transport the equipment to another location, take care to ensure that it is adequately secured an can never
be damaged by being dropped or by impacts on the equipment.
Fire hazard
• Never place naked flames (e.g. candles) near the equipment.
Humidity / heat sources
• Never expose the equipment to rain or a high level of humidity. For this reason do not install it in the immediate
vicinity of swimming pools, showers, damp basement rooms or other areas with unusually high atmospheric
humidity.
• Never place objects containing liquid (e.g. vases or drinking glasses) on the equipment. Liquids in the equipment
could cause a short circuit.
Connection
• Lay all connection cables so that they do not present a trip hazard.
• Whenever working on the inputs and outputs of the equipment disconnect the power supply.
• Please note that the input voltage is 100 - 240 V AC; the power consumption is < 2 W.
• If the equipment causes a blown fuse or a short circuit, disconnect it from the mains and have it checked and
repaired.
• Always pull out the power supply from the mains and/or from the equipment by the plug – never by the cable.
• Do not use the equipment if the power supply is damaged.
• If you connect defective or unsuitable accessories, the equipment could be damaged. Only use power supplies
available from or recommended by beyerdynamic.
• In order to disconnect the receiver from AC power, disconnect the power supply from the power socket.
TG 100 – Safety