D-Link DAP-3860 Guía De Instalación Rápida página 20

How to Establish Wireless Bridge Mode
The DAP-3860 supports four Modes, which are Bridge (CSMA)
and Bridge (TDMA). Normally, Wireless Bridge is the typical mode
on this unit. Here we will illustrate how to establish wireless bridge
connectivity with DAP-3860.
• Enter the user name (admin) and password (Null) to login and
make configurations.
Note:
• Due to browser's security trusted sites, 192.168.0.50 might not able
to be opened. You may choose to continue to the website.
• Open "Basic Setup" in "System", set the IP address of two DAP-
3860s in the same network segment. e.g. local DAP-3860 as
192.168.0.50 and remote DAP-3860 as 192.168.0.51 and set the
IP Subnet Mask on both as 255.255.255.0
D-Link DAP-3860 20