D-Link DAP-3860 Guía De Instalación Rápida página 23

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 55
Warning:
The MAC address on the housing of DAP-3860 is the ETH
MAC address; therefore it can not be used in Bridge Links.
The IP address of your PC should be in the same network
segment to the one of bridges.
Use ping to check whether the link between the two DAP-3860 is
OK.
To get a better wireless connectivity, antenna alignment is strongly
recommended after both DAP-3860s are installed long distance apart.
Login the Web-based interface of the local DAP-3860 and open
"Bridge Links Setup" in "Wireless". Select WLAN 0 and hit "Align
Antenna" button, an antenna alignment tool will popup. Specify the
Target RSSI and click "Start" to begin the antenna alignment.
23
D-Link DAP-3860

Publicidad

Tabla de contenido
loading

Tabla de contenido