Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Figure 6:
Firmly tighten the bolts with a 17mm wrench: use an angulated ring spanner or
better a socket wrench with proper socket. Open-ended spanners or fork
wrenches should not be used, because of possible danger of slipping or
damage of the nuts.
As soon as they are fully inserted, the brackets must sit firmly in the wall. If they
are still moving in any form, you must further tighten it.
Do not try to secure the wall brackets to loose wall stones or any
surfaces that are not absolutely firm connected to brickwork.
Make sure that brackets have been attached to wall firmly, so that they
cannot be pulled out when hanging on the awning.
Remove the safety belt after mounting; otherwise the awning cannot be
extracted.
Keep the belt; you can use it when storing the awing.
Attention: Misplacing and misapplying the awning can cause
seriously danger.
Usage
Adjusting Tilt Angle
The awning is already delivered with an optimally adjusted tilt angle. However,
users can adjust the screen angle within a range of 10° to 40°. A tilt angle
Publicidad
Tabla de contenido
